Check engine light on? Get a free check engine light test and an honest diagnosis from ASE certified technicians in the heart of Ocala.

Check Engine Light Diagnostics for Cars, Trucks & Diesels

Red car in the service bay for auto repair at Spencer's in Ocala

A glowing check engine light can mean anything from a loose gas cap to a misfire that’s damaging your catalytic converter. At Spencer’s Auto & Diesel, we start with a free check engine light test at our shop at 1734 NE 2nd Ave in Ocala, then explain exactly what the codes mean in plain language.

When a code needs more than a quick read, our ASE certified technicians test the system behind it so you’re not paying to swap parts that were never the problem. We diagnose gas cars, SUVs, pickups and light duty diesels, and we’ll give you straight answers with zero pressure.

What Our Check Engine Diagnostic Covers

Free Check Engine Light Test

Read the codes and tell you what they point to

  • Connect a scan tool and pull stored and pending codes
  • Check freeze frame data from the moment the light came on
  • Look for obvious causes like a loose gas cap or damaged wiring
  • Explain what each code means in plain language
  • Tell you whether the vehicle is safe to drive

Full Diagnostic Testing

Pinpoint the cause before any parts get replaced

  • Test the sensors, wiring and components tied to each code
  • Review live engine data while the vehicle runs
  • Check fuel trims, misfire counts and emissions monitors
  • Smoke test for vacuum and evaporative leaks when needed
  • Written recommendation with the repair options before work starts

We’ll always tell you what deeper testing involves and get your okay before any paid diagnostic work begins.

Common Reasons Your Check Engine Light Comes On

Loose or worn gas cap
One of the most common causes. A cap that does not seal sets an evaporative leak code.

Oxygen sensor failure
A bad O2 sensor throws off your fuel mixture and can drop fuel mileage fast.

Engine misfire
Worn spark plugs, ignition coils or injectors can cause a misfire and a flashing light.

Catalytic converter problems
Often the result of an ignored misfire. Catching the cause early saves the converter.

Mass airflow sensor issues
A dirty or failing MAF sensor causes rough idle, stalling and poor acceleration.

Diesel emissions faults
On diesels, DPF, EGR and DEF system codes are common and can trigger reduced power mode.

Solid Check Engine Light

A solid light means the computer found a fault that needs attention soon but usually isn’t an emergency. It’s a good time to bring it in before a small problem turns into an expensive one.

Flashing Check Engine Light

A flashing light usually means an active misfire. Unburned fuel can overheat and ruin the catalytic converter, so ease off the throttle and have it checked as soon as you can.

Diesel Emissions Codes

Power Stroke, Duramax and Cummins trucks run complex emissions systems. We diagnose DPF, EGR, DEF and sensor codes as part of our light duty diesel repair work.

Intermittent Codes

A light that comes and goes still stores a code. We read pending and history codes so we can track down problems that only show up some of the time.

How Our Check Engine Diagnostic Works

Call ahead or stop by during shop hours. Here’s what happens once your vehicle is in the bay.

  1. Free code scan. We pull stored and pending codes and look at the freeze frame data.
  2. Quick inspection. We check for simple causes like the gas cap, loose connections and damaged wiring.
  3. Plain explanation. We tell you what the codes point to and whether the vehicle is safe to drive.
  4. Deeper testing if needed. If the cause isn’t clear, we explain the testing involved and get your okay first.
  5. Repair options. You get our recommendation with no pressure, and we clear the codes after the repair is done.

Is It Safe to Drive With the Check Engine Light On?

It depends on how the light looks and how the vehicle drives.

What you see What it usually means What to do
Solid light, drives normally A fault that needs attention but is rarely urgent Schedule a check soon
Solid light with rough running A problem affecting performance or fuel use Get it checked within a day or two
Flashing light An active misfire that can damage the catalytic converter Slow down and get it checked right away
Light plus overheating or low oil pressure A serious engine problem Pull over safely and call us

Not sure which one you’re dealing with? Call us at (352) 629-0072 and we’ll help you decide.

Vehicles We Service

If it has a check engine light, we can scan it. That covers most of what Ocala drives.

Cars, SUVs & Gas Trucks

  • Domestic and import cars
  • SUVs and minivans
  • Half-ton and three-quarter-ton gas pickups

Light-Duty Diesels

  • Ford Power Stroke F-250 / F-350
  • Chevy and GMC Duramax 2500 / 3500
  • RAM Cummins 2500 / 3500 and chassis cabs

Work & Fleet Vehicles

  • Work vans and service vans
  • Box trucks and upfitted trucks
  • Company and municipal vehicles

Why Ocala Drivers Choose Spencer’s

ASE Certified Techs
Your diagnosis comes from a certified technician who tests the system, not a code reader at a parts counter.

Honest Recommendations
We show you what we found and explain your options. No pressure, no upsell.

Gas and Diesel Under One Roof
One shop for the family car and the work truck, including light duty diesels.

Veteran Owned
A veteran owned shop serving Ocala since 2019.

Inside Our Ocala Shop

Check Engine Light FAQs

Yes. We’ll connect a scan tool, read the stored codes and tell you what they point to at no charge. If the problem needs deeper testing to find the exact cause, we’ll explain what that involves and get your okay before any paid work starts.
If the light is solid and the vehicle drives normally, you can usually drive it to the shop, but have it checked soon. If the light is flashing, the engine is likely misfiring. Slow down, avoid hard acceleration and get it looked at right away to protect the catalytic converter.
Plenty of codes don’t change how the vehicle feels. A loose gas cap, a failing oxygen sensor or a small evaporative leak can all set the light while the engine runs normally. Ignoring them can still cost you fuel mileage or lead to bigger repairs.
A code tells you which system flagged a problem, not which part failed. One code can have several causes. Our technicians test the system behind the code so you only pay for the part that actually needs replacing.
Yes. We diagnose light duty diesels like Ford Power Stroke, Chevy and GMC Duramax and RAM Cummins, including emissions system codes for the DPF, EGR and DEF systems.
No. Clearing a code turns the light off, but the fault is still there and the light will come back. Clearing codes also resets the readiness monitors your vehicle needs to pass an emissions check.
Appointments are recommended so we can have a bay ready, but you’re welcome to call ahead or stop by during shop hours, Monday through Friday.

Find Us in Ocala

Spencer’s Auto & Diesel sits in Ocala’s Magnolia Business District at 1734 NE 2nd Ave, just minutes from downtown.

It’s an easy stop on the way into downtown or back out of it. Call ahead and we’ll have a bay ready to check your engine light, whether you drive a commuter car or a three-quarter-ton diesel.

  • Locally owned and run by Spencer, who spent years in high-volume repair shops before opening his own
  • ASE certified technicians on every job, gas or diesel
  • Serving Ocala and nearby Marion County communities like Silver Springs, Belleview and Dunnellon
  • Serving Ocala drivers since 2019
  • Straight answers and no-pressure recommendations, every visit

Spencer’s Auto & Diesel Repair
1734 NE 2nd Ave #1, Ocala, FL 34470
(352) 629-0072 · Monday to Friday, 8 AM to 5 PM
Get directions on Google Maps

GET A QUOTE TODAY

Name(Required)